MoO3催化碳酸二甲酯与乙酸苯酯合成碳酸二苯酯

采用焙烧法制备了MoO3催化剂并将其用于碳酸二甲酯(DMC)与乙酸苯酯(PA)合成碳酸二苯酯(DPC)反应,考察了焙烧温度对催化荆性能的影响,并用X射线衍射(XRD)对催化剂结构进行了表征.结果发现,在400或500℃焙烧的催化剂具有良好的催化性能,DMC转化率为73.9%,DPC和甲基苯基碳酸酯的选择性分别为39.5%和56.5%.XRD结果表明,该催化剂物相组成为正交晶系MoO3,且(021)或/和(110)晶面有利于酯交换反应.催化剂使用5次后DMC转化率从73.9%降至10.2%,多次重复使用后的催化剂在窄气气氛中于400或500℃焙烧即可再生,再生后催化剂的性能几乎和新鲜催化剂相当.     

Effect of preparation variables on morphology and pure water permeation flux through asymmetric cellulose acetate membranes

In this study, cellulose acetate (CA) ultrafiltration (UF) membranes were prepared using the phase inversion method. Effects of CA and polyethylene glycol (PEG) concentrations in the casting solution and coagulation bath temperature (CBT) on morphology of the synthesized membranes were investigated. Based on L₉ orthogonal array of Taguchi experimental design 18 membranes were synthesized (with two replications) and pure water permeation flux through them were measured. It was found out that increasing PEG concentration in the casting solution and CBT, accelerate diffusional exchange rate of solvent 1-methyl-2-pyrrolidone (NMP) and nonsolvent (water) and consequently facilitate formation of macrovoids in the membrane structure. Increasing CA concentration, however, slows down the demixing process. This prevents instantaneous growth of nucleuses in the membrane structure. Hence, a large number of small nucleuses are created and distributed throughout the polymer film and denser membranes are synthesized. Rate of water flux through the synthesized membranes is directly dependent on the size and number of macrovoids in the membrane structure. Thus, maximum value of flux is obtained at the highest levels of PEG concentration and CBT (10 wt.% and 23 °C, respectively) and the lowest level of CA concentration (13.5 wt.%). Analysis of variance (ANOVA) showed that all parameters have significant effects on the response. However, CBT is the less influential factor than CA and PEG concentrations on the response (flux).     

乙酸稀土盐催化缩聚合成聚(对苯二甲酸乙二酯-co-己二酸乙二酯)

合成了一系列乙酸稀土盐(乙酸钇,乙酸镧,乙酸钕,乙酸镝),作为单组分催化剂,采用熔融缩聚法催化对苯二甲酸二甲酯、乙二醇和1,6-己二酸的共缩聚反应,制备了芳香族脂肪族共聚酯——聚(对苯二甲酸乙二酯-co-己二酸乙二酯)(PETA).通过1H-NMR,SEC,DSC及力学性能测试表征了聚合物的序列结构,分子量及分布,热性能及机械性能.结果表明,乙酸稀土盐单组分可催化共缩聚反应,效果优良,能够合成高分子量和较窄分子量分布的共聚酯,共聚酯具有较高的拉伸强度和断裂伸长率.     

Highly active catalyst for vinyl acetate synthesis by modified activated carbon

A new zinc acetate catalyst which was prepared from modified activated carbon exhibited extreme activity towards the synthesis of vinyl acetate.The activated carbon was modified by nitric acid,vitriol and peroxyacetic acid(PAA).The effect on specific area, structure,pH and surface acidity groups of carriers by modification was discussed.Amount of carbonyl and carboxyl groups in activated carbon was increased by peroxyacetic acid treatment.The productivity of the new catalyst was 14.58%higher than that of...     

聚醋酸乙烯类梳型分散剂的制备与表征

颜料在工业生产和人们的日常生活中起着重要的作用.由于颜料颗粒具有较大的比表面积和较高的比表面能,是热力学不稳定体系,当分散在介质中时容易发生团聚,影响其特性的发挥[1],因此需加入分散剂使其在分散介质中稳定分散.     

Isothermal decomposition of γ-irradiated indium acetate

The isothermal decomposition of un-irradiated (pristine) and pre-γ-irradiated indium acetate was studied in the temperature range (298–1273 K) and in air using isothermal thermogravimetric technique. The data were analyzed using various solid-state reaction models. The results showed that the kinetic of isothermal decomposition of indium acetate was governed by random nucleation reaction (Erof’ev equation A₃). The kinetics and thermodynamic parameters of the main decomposition process for un-irradiated and γ-irradiated samples were calculated and evaluated.     

乙酸异丙酯的合成

以乙酸和异丙醇为原料,硫酸氢钠为催化剂,合成了乙酸异丙酯;考察了反应时间、酸醇比、催化剂用量、带水剂用量对酯化率的影响,确定了最佳酯化反应条件:反应时间60min,酸醇的物质的量的比1∶0.8,催化剂用量0.8g,带水剂用量8mL.在最佳反应条件下,酯化率最高可达84.3%.     

Toward the total synthesis of elisapterosin B: A Hg(OTf)(2)-promoted diastereoselective intramolecular Friedel-Crafts alkylation reaction

As part of an approach to the synthesis of the antitubercular agent elisapterosin B, we prepared two different chiral, non-racemic olefinic substrates and examined their diastereoselective ring closure using mercury salts. The effort yielded potential precursors to elisapterosin B in good yield with good to excellent diastereocontrol.     

Synthesis,cytotoxicity and antibacterial studies of symmetrically and non‐symmetrically benzyl‐ or p‐cyanobenzyl‐substituted N‐Heterocyclic carbene–silver complexes

From the reaction of 1H‐imidazole ( 1a ), 4,5‐dichloro‐1H‐imidazole ( 1b ) and 1H‐benzimidazole ( 1c ) with p‐cyanobenzyl bromide ( 2 ), symmetrically substituted N‐heterocyclic carbene (NHC) [( 3a–c )] precursors, 1‐methylimidazole ( 5a ), 4,5‐dichloro‐1‐methylimidazole ( 5b ) and 1‐methylbenzimidazole ( 5c ) with benzyl bromide ( 6 ), non‐symmetrically substituted N‐heterocyclic carbene (NHC) [( 7a–c )] precursors were synthesized. These NHC? precursors were then reacted with silver(I) acetate to yield the NHC‐silver complexes [1,3‐bis(4‐cyanobenzyl)imidazole‐2‐ylidene] silver(I) acetate ( 4a ), [4,5‐dichloro‐1,3‐bis(4‐cyanobenzyl)imidazole‐2‐ylidene] silver(I) acetate ( 4b ), [1,3‐bis(4‐cyanobenzyl)benzimidazole‐2‐ylidene] silver(I) acetate ( 4c ), (1‐methyl‐3‐benzylimidazole‐2‐ylidene) silver(I) acetate ( 8a ), (4,5‐dichloro‐1‐methyl‐3‐benzylimidazole‐2‐ylidene) silver(I) acetate ( 8b ) and (1‐methyl‐3‐benzylbenzimidazole‐2‐ylidene) silver(I) acetate ( 8c ) respectively. The four NHC‐precursors 3a–c, 7c and four NHC–silver complexes 4a–c and 8c were characterized by single crystal X‐ray diffraction. The preliminary antibacterial activity of all the compounds was studied against Gram‐negative bacteria Escherichia coli, and Gram‐positive bacteria Staphylococcus aureus using the qualitative Kirby‐Bauer disc‐diffusion method. All NHC–silver complexes exhibited medium to high antibacterial activity with areas of clearance ranging from 4 to 12 mm at the highest amount used, while the NHC‐precursors showed significantly lower activity. In addition, all NHC–silver complexes underwent preliminary cytotoxicity tests on the human renal‐cancer cell line Caki‐1 and showed medium to high cytotoxicity with IC₅₀ values ranging from 53 ( ± 8) to 3.2 ( ± 0.6) µM. Copyright © 2010 John Wiley & Sons, Ltd.     

Photoinitiated RAFT polymerization of vinyl acetate

A photoinitiation process was investigated to develop a rapid and well‐controlled RAFT polymerization method applied to vinyl acetate (VAc) using methyl (ethoxycarbonothioyl)sulfanyl acetate (MESA) and bis(2,4,6‐trimethylbenzoyl)phenylphosphine oxide as the RAFT agent and photoinitiator, respectively. MESA was selected as the photochemically inert RAFT agent to minimize photolysis of the thiocarbonylthio groups during polymerization. Poly(vinyl acetate) with a prespecified well‐controlled molecular weight (MW) and a narrow MW distribution was successfully synthesized. The polymerization reaction proceeded as a living polymerization and was remarkably rapid compared with approaches that use thermally initiated processes with a very short induction period. A detailed kinetic study of the mechanism underlying the polymerization reaction, however, revealed that the chain ends containing xanthate moieties were not perfectly stable upon UV‐irradiation, and they generated radicals via homolytic cleavage. This reaction appeared to proceed by a combination of a degenerative transfer RAFT mechanism and a dissociation‐combination mechanism. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012